Filter
Top Products
T
ROUBLESHOOTING
8.9
8
[Jam 1] or
[No Cartridge]
The toner cartridge is not
installed.
Install the toner cartridge. See
page 1.11.
[Line Busy]
The remote person did
not answer or the line is
already engaged.
Try again after a few minutes.
[Line Error]
Your machine cannot
connect with the remote
machine or has lost
contact because of a
problem with the phone
line.
Try again. If the problem
persists, wait an hour or so for
the line to clear and try again.
Or, turn the ECM on. See
page 4.35.
Load Document
You have attempted to
set up a copy or fax
operation with no
document loaded.
Load a document and try again.
Low Heat Error
There is a problem in the
fuser unit.
Unplug the power cord and plug
it back in. If the problem
persists, please contact a service
representative.
Open Heat Error
[Over Heat]
[LSU Error]
A problem has occurred
in the LSU (Laser
Scanning Unit).
Unplug the power cord and plug
it back in. If the problem
persists, please call for service.
Memory Full
The memory is full. Delete unnecessary documents,
retransmit after more memory
becomes available or split the
transmission into more than one
operation.
[No Answer]
The remote fax machine
has not answered after
several redial attempts.
Try again. Make sure that the
remote machine is operational.
No. Not
Assigned
The one-touch or speed
dial location you tried to
use has no number
assigned to it.
Dial the number manually using
the number keypad or assign the
number. For storing a number,
see “Automatic Dialing” on
page 4.15.
[No Paper]
Add Paper
The paper tray has run
out of paper.
Load paper in the paper tray. See
page 1.13.
Display Meaning Suggested solutions