Ricoh 4016 Series All in One Printer User Manual


 
T
ROUBLESHOOTING
8.17
8
Wrinkles or
creases
Ensure that the paper is loaded properly.
Check the paper type and quality. See “Paper Specification”
on page A.5.
Turn the stack of paper over in the paper tray. Also try
rotating the paper 180° in the tray.
Try printing to the rear output slot.
Back of printouts
are dirty
Check for leaking toner. Clean the inside of the machine.
See page 7.4.
Black pages
The toner cartridge may not be installed properly. Remove
the cartridge and reinsert.
The toner cartridge may be defective and need replacing.
Remove the toner cartridge and install a new one. See
“Replacing the Toner Cartridge” on page 7.9.
The machine may require repair. Contact a service
representative.
Loose toner
Clean the inside of the machine. See page 7.4.
Check the paper type and quality. See “Paper Specification”
on page A.5.
Remove the toner cartridge and install a new one. See
“Replacing the Toner Cartridge” on page 7.9.
If the problem persists, the machine may require repair.
Contact a service representative.
Condition Suggested solutions
A