Filter
Top Products
P
APER
H
ANDLING
2.8
Using the Manual Feeder
Use the manual feeder to print transparencies, labels, envelopes
or postcards in addition to making quick runs of paper types or
sizes that are not currently loaded in the paper tray.
Postcards, 3.5 by 5.83 in.(index) cards and other custom-sized
materials can be printed with this printer. The minimum size is
76 by 127 mm (3.0 by 5.0 in.) and the maximum size is 216 by
356 mm (8.5 by 14 in.)
Acceptable print materials are plain paper with sizes ranging
from 100 x 148 mm (3.9 x 5.8 in.) to Legal, 216 x 356 mm (8.5
x 14 in.), the largest size acceptable, and weighing between 16
lb and 32 lb.
N
OTES
:
• Always load only the print materials specified in the
Specifications on page A.5 to avoid paper jams and print quality
problems.
• Flatten any curl on postcards, envelopes and labels before
loading them into the manual feeder.
• When you print on 76 mm X 127 mm (3 X 5 in.) sized media with
loading into the tray, open the rear output tray.
1
Load a sheet of the print material with the print side face
up into the center of the manual feeder.
For envelopes, load a sheet with the flap side face down
and with the stamp area on the top left side.
For transparencies, hold them by the edges and avoid
touching the print side. Oils from your fingers can cause
print quality problems.
N
OTE
: You must open the rear output slot when you print on
transparencies. If not, they may tear while exiting the machine.