Filter
Top Products
28
Cutter Driver Options (ColorCAMM)
Clicking this button launches the Cutter Driver Options dialog box, shown below.
Custom Head Tab
None
When this mode is selected, Roland COLORCHOICE will not send any settings regarding the cutting
operation. The settings in the printer panel will be used instead.
Cut Fast, Cut Medium, Cut Slow
When these options are selected, Roland COLORCHOICE will send the settings for the cutting operation.
Speed
Set the cutting speed. Usually setting a lower speed will result in longer cut times, but will produce higher
quality results.
Cut Media
Check this option to cut the media after the output is complete.
The Communications Tab [only Windows]
The options available in the communications tab will change according to what port you have selected.
The Color Tab
The Color tab displays settings associated with the color quality of the image. Using the sliders on the tab, you
can adjust the image quality. The sliders that appear vary, depending on which color mode is selected on the
Print tab. In all modes, you can adjust the overall image contrast using the Contrast slider.