Filter
Top Products
39
Advanced Printing Procedures [Macintosh]
If your program is not listed, refer to a section on a similar program.
Illustrator 8.0
[Macintosh]
ColorSync 2.x or higher and Kodak Digital Science must be installed when using Illustrator to create CMYK
files.
1. From the Roland COLORCHOICE Print Monitor click Printer>Setup Properties. Then click the Print Tab.
2. Make sure the Perform Color Correction checkbox has a check in it, and that correct output profile and
rendering intent are set.
3. Click
OK
to close the Setup Properties dialog box.
4. Go to Apple menu and select Chooser. Highlight Adobe PS and make sure Printer Name@... is selected.
5. In Illustrator, go to File>Document Setup.
6. Select Options ‘Use printers default screen’, and then check box for Use Page Setup and click the Page
Setup button.
7. Choose a standard paper size in the Paper field.
8. Select Custom Page Default from the pop-up menu if a custom page size is required, and enter your
custom page size. Click the
Add
button.
9. Select Page Attribute from the pop-up menu. Select the defined Custom Page in the ‘Paper’ field.
10. Click
OK
to AdobePS Page Setting dialog. Click
OK
to Document Setup dialog.
11. Go to File>Color Setting and check ‘Simulate print colors on display’ if you want your monitor to soft-
proof CMYK output.
12. Go to File>Print. Select your printer in the ‘Printer’ field and select the page you want to print, and the
number of copies.
13. Select Adobe Illustrator 8 from the pop-up menu.
•
Set Output to Composite.
•
Set PostScript to Level 3.
•
Set Data to Binary.
•
Check Force Fonts to Download.
14. Select Printer Specific Options from pop-up menu. If you want the file to be printed automatically select
Print in the After Spooling option. If you want to verify the print mode and profile settings before printing
the file, select
Hold
. Select
Hold
in the After Printing, if you want to keep the file in the Print Monitor.
15. Click
Print
to start printing.
PageMaker 6.5
[Macintosh]
ColorSync 2.x or higher must be installed when using PageMaker to create CMYK files. If, after attempting the
following procedure, you still have difficulty printing, save the file as a PostScript file and add it to the Print
Monitor using the Add Job function.
1. From the Roland COLORCHOICE Print Monitor click Printer>Setup Properties. Then click the Print Tab.
2. Make sure the Perform Color Correction checkbox has a check in it, correct output profiles and rendering
intent are set.
3. Click
OK
to close Setup Properties.
4. Go to Apple menu and select Chooser. Highlight Adobe PS and make sure Printer Name@... is selected.
5. In PageMaker, go to File>Document Setup.