Filter
Top Products
33
Illustrator 8
[Windows]
The Kodak Color Management System must be installed to output successfully from Illustrator 8 to Roland
COLORCHOICE Software.
1. From the Roland COLORCHOICE Print Monitor click Setup>Setup Properties. Then click the Print tab.
2. Make sure the Perform Color Correction check box has a check in it.
3. Click
OK
in the Setup Properties dialog.
4. In Illustrator, go to File>Document Setup.
5. Select ‘Use printers default screen.’
6. Select ‘Use Print Setup’.
7. Click the Print Setup button. Print Setup screen appears.
8. Select your printer in the Name field.
9. Click the Properties button.
10. Choose a paper size from the ‘Paper’ field or select a Custom page for a custom page size.
11. If you choose a custom page size, you may enter the custom size by clicking the Custom button and
entering the width and height.
12. If you choose custom page, click
OK
to Custom Defined Size dialog.
13. Click
OK
in the Properties dialog.
14. Click
OK
in the Print Setup dialog.
15. Click
OK
in the Document Setup dialog.
16. If you want your monitor to soft-proof CMYK output, go to File>Color Settings and check ‘Simulate print
colors on display’.
17. Go to File>Print.
18. If not dimmed, set Output to Composite.
19. Set PostScript to Level 3.
20. Check Force Fonts to Download.
21. Click
OK
to print.
PageMaker 6.5
[Windows]
These directions assume that you have Kodak ICC Color Management installed.
Before starting PageMaker, copy your printers’ PPD files to PM65\RSRC\USENGLSH\PPD4 directory. The
PPDs can be found on your installation CD in the ‘Ppd’ folder.
1. From the Roland COLORCHOICE Print Monitor click Setup>Setup Properties. Then click the Print tab.
2. Make sure the Perform Color Correction checkbox has a check in it.
3. In the ICC input profile area, select appropriate CMYK and RGB profiles. If you know which profiles your
application is using, select that profile. If you don’t, use the default settings.
4. For the ICC output profile, select the appropriate ink/media combination. Also select a rendering intent to
use. Click the Info button to see a full description of the selected profile.
5. Click
OK
to Setup Properties.
6. In PageMaker go to File>Document Setup.
7. From the Page size field select your paper size or choose Custom for a custom page size.