Filter
Top Products
2-18
Chapter 2
Hardware Descriptions
KDB-SLI
This daughterboard can be installed only in a 12B or 24B keyset. The KDB-SLI provides one
additional SLI circuit for the connection of any standard telephone device. This KDB-SLI will
only operate when the keyset is connected to an 8-port DLI card so it can use the second B
channel. Each port on this card is intended for connection to one telephone. Connecting
multiple telephones to a port may result in incorrect operation or damage to the card. (See
Chapter 3 of the Samsung OfficeServ500 Installation Manual for details.)
NOTE: The circuitry on a KDB-SLI does not provide a loop open disconnect signal or have
the over-voltage protection necessary for OPX operation.
iDCS SERIES KEYSETS
28-Button iDCS Keyset (28D) (Figure 2–17)
y 32-character display (2 x 16) with three associated soft
keys and scroll key
y 28 programmable keys with tri-coloured LEDs
y Two fixed-function keys
y Keyset Status Indicator
y Built-in speakerphone
y Eight selectable ring tones
y Volume Up/Down keys for digital control
of speaker, handset and ringer volumes
y Desk- or wall-mounted
18-Button
iDCS Keyset (18D) (Figure 2–18)
y 32-character display (2 x 16) with three associated soft
keys and scroll key
y 18 programmable keys with tri-coloured LEDs
y Two fixed-function keys
y Keyset Status Indicator
y Built-in speakerphone
y Eight selectable ring tones
y Volume Up/Down keys for digital control
of speaker, handset and ringer volumes
y Desk- or wall-mounted
Figure 2–17 28-Button iDCS Keyset (28D)
Figure 2–18 18-Button iDCS Keyset (18D)