Filter
Top Products
4-30
Chapter 4
Business Features Package
One-Time Do Not Disturb
The Do Not Disturb (One Time) feature is used to stop all calls to a station when the user is
on an outside line and does not want to be disturbed for the duration of the call. Upon
completion of the call, DND is cancelled and the station is returned to normal service. This
feature requires a programmed key.
One-Touch Dialling Keys
Frequently-used speed numbers can be assigned to one touch dialling keys for fast accurate
dialling.
On-Hook Dialling
Any keyset user can originate calls without lifting the handset. When the called party answers,
the user may speak into the microphone or lift the handset for more privacy.
Privacy Release
This feature will allow another station to join in on your conversation by temporarily releasing
privacy on the C.O. line from your keyset. Requires a Privacy Release key to be
programmed on your keyset. A maximum of three other people can join in. This uses one of
the conference circuits in the system.
Programmable Keys
Some keysets have a number of programmable keys. The number depends on the type of
keyset, e.g. 14 (DS-5014D), 21 (DS-5021D), 24B (Euro), 12B (Euro), and so on. Each key
can be programmed for more than 25 different uses to personalise each phone. Examples of
key assignments include individual outside line, individual station, group of lines, group of
stations and one-touch speed dial keys. Using these keys eliminates the need to use dialling
access codes.
The following feature keys have extenders that make them more specific: SPEED DIAL,
SUPERVISOR, PAGE, DSS, DIRECTED PICKUP, GROUP PICKUP, DOOR PHONE, BOSS,
PARK, PROGRAMMED MESSAGE, IN AND OUT OF GROUP, FORWARD and VOICE MAIL
TRANSFER. The extender can be a station, a group or another identifying number.
Programmed Station Messages
A station user may select one of a number of messages to be displayed both at a calling
party’s keyset and on the station’s display. There are 15 possible messages (01–15)
supported.
Messages 01–10 are pre-set with a selection of single-line text, but these can be changed in
programming. The remaining messages (11–15) can be customised by the system
administrator, up to 16 characters maximum.
NOTE: The calling party must have a display keyset to view these messages.