Filter
Top Products
4-26
Chapter 4
Business Features Package
Station Feature Descriptions
Add-On Modules (AOM)
A variety of AOMs are available for connecting to keysets. They increase the number of
available programmable keys. The keys, with red LEDs, can be used for feature keys,
DSS/BLF keys or one-touch speed dial keys.
14-Key AOM for iDCS Series Keysets
14 programmable keys add to the capability of any iDCS series keyset.
48-Key AOM for DCS (Euro) Keysets
48 programmable keys add to the capability of any DCS Euro keyset. Up to four 48-key AOMs can be
added to a keyset.
64-Key AOM for iDCS Series Keysets
The 64 programmable keys add to the capability of any iDCS series keyset. Up to four 64-key AOMs
can be added to each keyset. A maximum of eight can be installed on an ‘M’ system, and a maximum
of 32 on an ‘L’ system.
64-Key AOM (DS-5064B) for 5000 Series Keysets
The 64 programmable keys add to the capability of any 5000 series keyset. Up to four 64-key AOMs
can be added to a keyset. A maximum of eight can be installed on an ‘M’ system, and a maximum of
32 on an ‘L’ system.
Appointment Reminder
Keysets with an alarm key can be used like an alarm clock. When programmed for a specific
time, the keyset will sound a distinctive ring to remind the user of meetings or appointments.
Alarms can be set for “today” only or for every day at the same time. Up to three alarms may
be set at each keyset. Display keysets can also show a programmed message when the
alarm rings.
Automatic Hold
Station users can enable or disable automatic hold at their keysets. While a user is engaged
on an outside (C.O.) call, pressing another trunk key, route key or CALL key automatically
puts the call on hold when this feature is enabled. Pressing TRANSFER (TRSF),
CONFERENCE, PAGE or a DSS key will always automatically place the call on hold. This
type of automatic hold is not a user-selectable option.
NOTE: Internal calls cannot be automatically held.
Automatic Privacy
All conversations on outside lines and internal calls are automatically private. The privacy
feature can be turned off on a per-line basis.