Filter
Top Products
Setting Up Your Printer
2.5
7
Insert and slide the paper tray back into the printer.
Changing the Size of the Paper in the
Paper Tray
The tray is preset to Letter or A4 size, depending on your
country. To change the size, you need to adjust the paper
guides.
1
Push the back plate of the tray outwards completely so
that it can extend the length of the tray.
2
Squeeze the paper length guide and slide it to the correct
position for the paper size you are loading, which is
marked at the bottom of the tray.
3
Squeeze the paper width guide and slide it to the desired
paper size marked at the bottom of the tray.
N
OTES
:
• Do not push the paper width guide far enough to cause the
material to warp.
• If you do not adjust the paper width guide, it may cause
paper jams.
4
Load paper with the print side down. For details, see from
step 5 on page 2.4.