Filter
Top Products
Solving Problems
7.11
Engine Fuser
Low Heat Error
The temperature in the
fuser is abnormally low.
Unplug the power cord and
plug it in again. If the
problem persists, call for
service.
Engine Fuser
Over Heat Error
The temperature in the
fuser is abnormally high.
Unplug the power cord and
plug it in again. If the
problem persists, call for
service.
Engine Hsync
Error
There is a problem in
your printer engine.
Turn off and then on the
printer.
Engine LSU Error A problem has occurred
in the LSU (Laser
Scanning Unit) in the
printer.
Unplug the power cord and
plug it in again. If the
problem persists, call for
service.
Initialize
System
The printer is now
turning on.
Wait until your printer turns
on completely.
Load Manual
Press Cont Key
The Multi-Purpose Tray
is empty in manual feed
mode.
Load a sheet of print
material and press the
On
Line/Continue
button.
You need to press the
button each page to be
printed.
Load
[Size] In [Tray]
The paper size specified
in the printer properties
does not match the
paper you are loading.
Load the correct paper in
the tray.
Memory Overflow The printer does not
have enough memory to
print the current job.
The job will be
automatically cleared and
the printer will return to
ready mode.
Expand the memory in your
printer. See“Installing
Memory DIMM” on
page 9.1.
Menu The
Menu
button is
pressed.
Use the printer features.
Offline The printer is off-line
and cannot print.
Press the
On Line/
Continue
button.
Outbin Full The output tray is full. It can hold up to 250 sheets
of paper. Once the paper is
removed from the output
bin, the printer resumes
printing.
Message Status Do this... Message Status Do this...
Page Too Complex Too complicated data
was sent to the printer.
Simplify the page layout
and
remove unnecessary
graphics from your
docum
ent.
If the message persists,
exp
and the memory in your
printer. See “Installing
Memory DIMM” on
page 9.1.
Paper Empty
[Size] In [Tray]
Th
e displayed tray is
empty.
Lo
ad the corresponding size
of paper into the tray.
Paper Jam 0 A paper jam occurs in
the paper feed area.
Remove the jammed paper
from the tray in use,
referring to page 7.4.
Paper Jam 1 A paper jam occurs
ar
ound the toner
cartridge.
Remove the jammed paper
from the printer, referring
to
page 7.6.
Paper Jam 2 A paper jam occurs in
the paper exit area.
Remove the jammed paper
from
the output tray,
referring to page 7.7.
Load Manual The paper size specified
Press Cont key in the printer properties
does
not match the
paper
you are loading.
Load the correct paper and
press the
On Line/
Co
ntinue
button.
Pr
inting xxx
(xxx: Emulation)
The printer is printing
jobs
using the displayed
language.
Complete your printing.
Ready The printer is on-line
and
ready to printer.
Us
e your printer.
Ready
Close Tray 1
Th
e Tray 1 is open but
ther
e is paper in the
Multi-Pu
rpose Tray.
Close
the Tray 1 to clear the
message.
Ready
Close Tray 2
The optional Tray 2 is
open but there is paper
in the Multi-Purpose
Tray.
Clos
e the optional Tray 2 to
clear the message.
Ready IP Conflict An IP address conflicts
with other devices on
the
network.
Contact your network
administrator and choose
an
address within your
sub
net which will not
co
nflict with any other
devices.
Ready
Low Toner
The toner cartridge in
your printer is nearly
empty.
Redistribute the toner,
referring to page 6.2.