Filter
Top Products
4.5
Stand-alone Fax
Before using the Distinctive Ring Pattern Detection option, the Distinctive
Ring service must be installed on your telephone line by the telephone
company. To setup the Distinctive Ring Pattern Detection, you will need
another telephone line at your location, or someone available to dial your
FAX number from another phone line.
1. Call your fax number from another telephone. When your machine
begins to ring, do not answer the call.
2. Press Setup on the front panel. The display shows the first menu;
DATE & TIME.
3. Press Menu repeatedly until you find ‘SYSTEM SETUP.’
4. Press Start/Enter to access the System Setup menu. The first
option, ‘RINGER VOLUME’ appears.
5. Press Menu until you find ‘SETUP DRPD.’
6. Press Start/Enter. Your machine starts learning the pattern and the
display shows ‘LEARNING DRPD.’
7. When the machine completes learning, the display shows ‘DONE’. And
then, the machine returns to Standby mode and the reception mode is
automatically set to DRPD mode.
Notes:
• DRPD must be set up again if you re-assign your fax number, or connect
the machine to another telephone line.
• After DRPD has been set up, call your fax number again to verify that the
machine answers with a fax tone. Then have a call placed to a different
number assigned to that same line to be sure the call is forwarded to the
extension telephone or answering machine plugged into the EXT jack.