Filter
Top Products
4.30
Stand-alone Fax
6. Press a one-touch button where the fax number you wish to include in
the group is stored.
Or,
Enter a 2-digit speed dial location where the fax number you wish to
include in the group is stored.
7. Press Start/Enter. Repeat step 6 to enter additional numbers into
the selected group.
8. Press Stop when you have entered all the desired destinations.
The display asks you to enter a name.
9. To assign a name to the group, enter the desired name. See page
4.17 for entering letters.
Or,
If you do not want to assign a name, skip this procedure.
10. Press Start/Enter. The display asks you to select a one-touch
number for another group dial.
11. To continue storing, press the wanted one-touch button and repeat
steps 4 through 10.
12. To stop storing, press Stop. The display returns to Standby mode.
Note: You cannot include one group dial number in another group dial
number.
Sending a Fax Using Group Dialing
(Multi-Address Transmission)
You can use Group Dialling for the Delayed Transmission or Memory
Transmission.
Follow the procedure of the desired operation (Delayed Transmission -
p.4.24, Memory Transmission - p.4.26). When the display requests you
to enter the remote fax number, press the one-touch button where you
stored the group number. You can use only one group number for each
operation. Continue the procedure to complete the desired operation.
The machine automatically scans the document into memory and dials
each of the numbers included in the Group.