Filter
Top Products
4.26
Stand-alone Fax
Memory Transmission
This feature will allow documents to be sent to multiple locations. After
sending, the documents are erased from the memory.
1. Load your document face down with the top edge first going into the
document feeder. And adjust Resolution, and Contrast, if necessary.
For details, see page 4.7.
2. Press Advanced Fax on the front panel.
The display shows the first menu; DELAY TX.
3. Press Menu until the display shows ‘MEMORY TX.’
4. Press Start/Enter to access the Memory TX menu.
5. Enter the number of the remote machine using the number keypad.
You can also press a one-touch button including group dial buttons. If
not, press Speed, enter a 2-digit speed dial number, then press
Start/Enter. The stored number appears on the display.
6. Press Start/Enter to confirm the number. The display asks you to
enter another fax number.
7. Select YES or NO by pressing Option, then Start/Enter.
If you want to send to more than one location, select YES and repeat
steps 5 and 6.
Note: You cannot use Group dial numbers for another fax number.
Or,
To send to one location or when you complete the last fax number
setting, select NO and press Start/Enter.
8. The document will be scanned into memory. The display shows the
memory capacity and the number of pages being stored. The machine
begins sending the documents in order of the numbers you entered.