Filter
Top Products
1.15
Set Up Your Machine
Setting Date and Time
The current date and time are shown in the display when the machine is on
and ready for use (Standby Mode). The date and time are printed on all
faxes you send.
1. Press Menu, then press Date & Time on the One-Touch keypad. The
display asks you to choose a date format.
2. Choose the desired date format by pressing 1 for U.K., or 2 for USA.
You can also choose the format by pressing à or ¨, then Enter.
If you select USA, the date format will be displayed as MMDDYY. The
U.K. will be displayed as DDMMYY.
The display shows the current set date and time.
3. Change the date and time by pressing
Ã
or
¨
to move the blinking
cursor under the number you want to change, and enter the correct
number using the number keypad.
DD (Day) = 01~31
MM (Month) = 01~12
YY (Year) = two digits
HH (Hour) = 00~23
MM (Minute) = 00~59
4. When the date and time are correct, press Enter.
If you enter an invalid number, the machine beeps and doesnÕt proceed
to the next step. If this happens, just reenter the correct number.
The display shows the date and time you have set, then returns to
Standby Mode.
SET DATE FORMAT
1.U.K. 2.USA
DD-MM-YY HH:MM
07-07-98 10:30
1 Getting Started