Filter
Top Products
2.34
Other Features
Tone
You may often need to use Touch-Tone dial signals to perform special
operations by phone. Bank-by-phone and voice mail are two examples of
systems that require these signals. If you have pulse service, you can still
send Touch-Tone signals by following these steps.
1. Dial the number using pulse dialling.
2. When the remote phone answers, press . Any numbers you now
press will be sent as Touch tones for the remainder of the call.
3. Dial the remaining numbers required by the service. The machine
returns to the pulse mode after you finish the call.
Recall
When a call comes in and you want to connect the caller to another person,
you can transfer the call by pressing Recall and dialling the number of that
other person. This is a timed-break recall facility only, and you may not be
able to use to use it with some phone systems. Contact your phone
supplier.
1. When you are on the phone and want the caller to be connected to
another person, press Recall.
2. Enter the number of the other person.
If you do not have a special service that uses the switch-hook signal, donÕt
press
Recall
during a call. If you do, you could disconnect the line.
Dual
Your machine can perform more than one of its many functions at the same
time. For example, you can simultaneously:
¥ Receive a fax into memory while making a copy.
¥ Store a fax document for later transmission while printing an incoming
fax.
When the machine performs dual tasks, Press Dual to toggle the display
between the current operation and new operation.