Filter
Top Products
3.12
Troubleshooting
Cleaning the Document Scanner
To keep your machine working properly, occasionally clean the White
Roller, ADF rubber, and the scanning glass. If they are dirty, documents
sent to another fax machine will not be clear.
Do not turn the power off to clean the scanner, as documents stored in
memory will be lost.
1. Open the control panel.
2. Disassemble the White Roller as follows:
Both ends of the White Roller have plastic bushings that are snapped
shut with small tabs on them. Pull the bushing slightly inward (A) , then
rotate (B) until it reaches the slot. Then pull the roller upward.
A
B
3. Wipe the roller surface with a soft cloth dampened with water.
busing