Filter
Top Products
2.25
Receiving a Fax
If the remote machine is secured with a Poll Code, you must enter the
correct code, and press Enter.
OR
If the remote machine is not secured with a Poll Code, press Enter to
accept [0000] which represents no code.
6. The display asks you to enter the START and END times. Enter the time
your machine starts and ends polling everyday. Enter the time in 24-
hour format. For example, enter 2030 for 8:30 PM.
Your machine will poll the remote machine(s) regularly, between the start
and end times, at the interval you specified in step 8.
7. Press Enter when the time appears correctly in the display. The display
asks you to enter the length of time to wait before attempting the next
polling.
8. Enter the time interval, then press Enter. For example, to set your
machine to poll the remote machine at 30-minute intervals, enter 0030.
9. The machine returns to Standby Mode and the display shows a reminder
that Continuous Polling is set.
After Continuous Polling ends, a multi-communication report will be
printed to show the result, if you had enabled this feature in ÔUser
Options.Õ See page 2.36.
[START [END]
20:30 23:30
→
→
INTERVAL TIME
[00:30]
15-05-1998 FRI
CONTI-POLL 22:30
start time
2 Operation