Filter
Top Products
2.28
Automatic Dialling
4. The display asks you to enter a name. Enter the desired name (up to 20
digits). For information on how to enter names, see page 2.4.
OR
If you donÕt want to assign a name, skip this step.
If you assign a name to the number, the name appears in the display
when you press the One-Touch button.
5. Press Enter.
6. To set another One-Touch number, press the desired button and repeat
steps 2 through 5.
OR
To return to Standby Mode, press Stop.
Dialling a One-Touch Number
1. Press the One-Touch button (01 through 20) at which you stored a
number. The number will be automatically dialled.
2. If you are making a phone call, pick up the handset when the other
person answers.
OR
If a document is loaded in the document tray, the document begins to
transmit after the remote fax machine answers the phone.
Using Address Label
A One-Touch label sheet is included with your machine. As you store
numbers in One-Touch dial buttons, make a note of the numbers on the
label.
1. Remove the clear cover and
label using an instrument with
a pointed end, as shown at
right.
2. Write information on the label
and replace the label and cover.
You may want to use pencil in
case you wish to change these
numbers later.