Filter
Top Products
2.38
Other Features
¥ AUTO REDUCTIONÑWhen receiving a document as long as or longer
than the paper installed in your machine, the machine can reduce the
data in the document to fit your recording paper size.
Turn ON this feature if you want to reduce an incoming page that may
otherwise need to be divided into two pages with only a few centimeters
on the second page. If the fax machine cannot reduce the data to fit into
one page with the feature enabled, the data is divided and printed in
actual size on two or more sheets, if needed.
Press 1 to turn this feature ON.
Press 2 to turn this feature OFF. The overflow data will be printed out on
a second page.
Original Received data
Original Received data
- VERTICAL REDUC. (Reduction)ÑIf you turn the Automatic
Reduction feature on, you are allowed to select Vertical Reduction ON
or OFF. When you select Vertical Reduction to be ON, the machine
will reduce an incoming page containing overflow data only in
vertical, as shown below:
If you want to reduce both in vertical and horizontal at the same rate
in order to maintain height to width relationships, turn the Vertical
Reduction feature OFF. If you turn off this feature, the machine
reduces the data as shown below.
Press 1 to turn this feature ON.
Press 2 to turn this feature OFF.
¥ DISCARD SIZEÑWhen receiving a document as long as or longer than
the paper installed in your fax machine, you can set the fax machine to
discard any excess image at the bottom of the page to fit into the
recording paper size.
If the received page is outside the margin you set, it will be printed on
two sheets of paper at the actual size.
If the data is within the margin, and the Auto Reduction feature is turned
on, it will be reduced to fit into the appropriate size paper (Discard does
not take place). If the Auto Reduction feature is turned OFF or fails, data
within the margin will be discarded.
Enter the desired discard size using the number keypad, and press Enter.