Filter
Top Products
2 Operation
2.39
Other Features
¥ RETRY INTERVALÑYour machine can automatically redial a remote fax
machine if it was busy or does not answer the first call.
Enter the number of minutes (from 1 to 7) using the number keypad.
¥ RETRY COUNTÑEnter the number of attempts (from 0 to 2) to redial
the number before giving up.
If you enter 0, the machine will not redial.
¥ ANSWER ON RINGS ÑYou can select the number of times your
machine rings before answering an incoming call. If you are using your
machine as both a telephone and a fax machine, we suggest you set the
ring count to at least 4 to give you time to answer.
Enter a number shown on the display by using the number keypad.
¥ FORCE MEMORY TXÑIf you are annoyed that you have to wait until
documents in the feeder are sent out when you try to send or reserve
another fax, turn this feature on. This feature enables all transmission
documents to be automatically scanned into memory before transmission.
Press 1 to turn this feature ON.
Press 2 to turn this feature OFF.
¥ PRINT RTI (Receive Terminal Identification)ÑThis feature allows the
machine to automatically print the page number, the date and time of the
reception at the bottom of each page of a received document.
Press 1 to turn this feature ON.
Press 2 to turn this feature OFF.
¥ CONT (Continuous) POLL REPORTÑEvery time continuous polling
ends, a multi-communication report will be printed to show the result for
each registered station.
Press 1 (ON) to print the report automatically each time continuous
polling ends.
Press 2 to turn the feature OFF. The report will not be printed.
¥ FAX PRINT QUALITYÑWhen you select LQ, the machine prints in low
speed with high quality. When you select DRAFT, the machine prints in
high speed with low quality.
Press 1 to select LQ.
Press 2 to select DRAFT.