Section 5: Printer Configuration
SATO M10e Service Manual PN: 9001113A Page 5-10
CONFIGURATION MODES
MODE KEY SEQUENCE INITIAL DISPLAY
Normal POWER ONLINE QTY:000000
Advanced LINE + POWER ADVANCED MODE
Card
Service
Counters
Test Print FEED + POWER TEST PRINT MODE
Default Setting LINE + FEED + POWER DEFAULT SETTING YES NO
Maintenance-Factory LINE + FEED + POWER FACTORY MODE
All Clear
Clear Non-Standard Protocol DSW2-7 ON + LINE + FEED + POWER ALT. PROTOCOL
Protocol Code Download DSW2-7 ON + POWER + LINE USER DOWNLOAD
Hex Dump DSW2-4 ON + POWER ONLINE QTY: 000000
NORMAL MODE
The printer initially powers on in the ONLINE mode. The user can access the User Settings using the
following procedures.
LCD DISPLAY DEFINITION
V 05.00.03.00
INITIALIZING
Displays the firmware during the initialization.
ONLINE
QTY:000000
The operational status is displayed on the top line and the label quantity on the
bottom. The print quantity descends as labels are printed. Press the LINE key
to change the status.
OFFLINE
000000
Press the LINE key once. When the display changes to OFFLINE, press the
FEED and LINE keys simultaneously for more than one second and release.
PRINT DARKNESS
12 345
The LCD now displays the five Print Darkness options. The lowest setting
represents the lightest print and the highest setting the darkest print.
1. Use the Cursor keys to step the cursor to the desired option.
2. Press the ENTER key to select the option and advance to the next display
PRINT SPEED
2 4 6 8 10
The current setting is indicated by the cursor.
1. Use the Cursor keys to step the cursor to the desired option.
2. Press the ENTER key to select the option and advance to the next display.
