Filter
Top Products
86
ENGLISH
Control Menu
Code Description Adjustment range Factory setting
rr
rr
ll
ll
nn
nn
RV Inhib.
No - Yes No
•Inhibition of operation in the opposite direction to that controlled by the logic inputs, even if this
reversal is required by a summing or process control function.
•Inhibition of reverse if it is controlled by the FWD/REV key on the display module.
bb
bb
SS
SS
PP
PP
deadb./pedst
No
BNS:Pedestal
BLS:Deadband
No
Management of operation at low speed :
CC
CC
rr
rr
LL
LL
CC
CC
rr
rr
HH
HH
AI2 min Ref.- mA
AI2 Max. Ref- mA
0 to 20 mA
4 to 20 mA
4 mA
20 mA
Minimum and maximum value of the signal on input AI2.
These two parameters are used to define the signal sent to AI2. There are several configuration
possibilities, one of which is to configure the input for a 0-20 mA, 4-20 mA, 20-4mA, etc signal.
GP_ATV58_EN.fm Page 86 Mardi, 2. avril 2002 9:13 21