Filter
Top Products
89
ENGLISH
I/O Menu
Summary table of the configurable input and encoder assignment
(1) NB : The menu for assigning encoder input A+, A-, B+, B- is called "Assign AI3".
CAUTION : If relay R2 is assigned to the "brake sequence" function, AI3 is automatically assigned in
the factory setting to Tacho Feedback, if the card is present. However, it is still possible to reassign
AI3.
Summary table for configurable outputs
I/O extension option cards Analog input
AI3
Encoder
input (1)
A+, A-,
B+, B-
Speed controller without option Analog input
AI2
NO:Not assigned
(Not assigned) X X X
FR2:Speed Ref2
(Speed reference 2)
If one LI = RFC
X
SAI:Summed Ref.
(Summing reference) X X X
PIF:PI Regulator
(Pl regulator feedback) X X
PIM:PI Man.ref.
(Manual PI speed reference)
If one AI = PIF and one LI = PAU
X
SFB:Tacho feedbk
(Tachogenerator) X
PTC:Therm.Sensor
(PTC probes) X
ATL:Torque Lim.
(Torque limit) X
RGI:PG feedbk
(Encoder or sensor feedback) X
I/O extension option card Logic output
LO
Speed controller without option Relay R2
NO:Not assigned
(Not assigned) X X
RUN:DriveRunning
(Speed controller running) X X
OCC:OutputCont.
(Downstream contactor control) X X
FTA:Freq Attain.
(Threshold freq. reached) X X
FLA:HSP Attained
(HSP reached) X X
CTA:I Attained
(Current threshold reached) X X
SRA:FRH Attained
(Frequency reference reached) X X
TSA:MtrTherm Lvl
(Motor thermal threshold reached) X X
BLC:Brk Logic
(Brake sequence) X
APL:4-20 mA loss
(Loss of 4-20 mA signal) X X
F2A:F2 Attained
(Second frequency threshold reached) X X
TAD:ATV th. Alarm
(Drive thermal threshold reached) X X
GP_ATV58_EN.fm Page 89 Mardi, 2. avril 2002 6:09 18