Sending a Fax
71
3. Sending
Faxes
2 Place the original on the document glass or in the auto document
feeder.
Using the document glass:
Open the document glass cover and place
the original face down on the glass with
the top edge against the document guide.
• Make sure the centre of the original is
aligned with the centre mark on the
document guide, and then close the
cover.
Using the auto document feeder:
Adjust the document guide to the width of
your original(s), and then insert the
originals face up into the feeder.
• Up to 20 A4-size sheets can be
inserted at once.
• For detailed information on using the
auto document feeder and the types of
originals that can be used, see pages
65 to 67.
♦ If an original is placed in both the auto document feeder and on the
document glass, the original in the auto document feeder will be faxed.
♦ When the document glass is used to send a fax, the document image
printed by the receiving machine may be reduced slightly more than when
the auto document feeder is used, and there may be a slightly larger
margin at the bottom of the page (this will depend on the size of paper
used by the receiving machine).