Sharp AM-300 All in One Printer User Manual


 
Other Fax Transmission Settings
85
3. Sending
Faxes
Automatic redialling after a line error
If you use Direct Keypad Dialling, Speed Dialling or Search Dialling to send a
fax and a line error occurs during the transmission, the machine will
automatically redial the number and attempt to complete the transmission.
Retransmission will begin from the page which was being transmitted when
the error occurred. The machine will make one attempt at retransmission after
an interval of two minutes.
To cancel a job that is waiting for automatic redialling, follow the procedure
in Checking and cancelling stored fax jobs on page 82. (When you scroll to
the job during the procedure, the number or name of the destination will
alternate with RECALL: ERROR in the display.)
Recall interval for automatic redialling after a line error
occurs
If desired, you can change the interval after which the machine makes an
automatic redialling attempt when a line error occurs.
The initial setting is “02” minutes.
1 Make sure that the date and time
display of fax mode appears (if needed
press ) and then press .
2 Press .
3 Press .
4 Press .
5 Press .
FAX
MENU
1: AUTO RECALL
Display:
FAX SETTING
1: RECALL [BUSY]
1: RECALL INTERV.
ENTER (01 - 15) 02
RECALL INTERVAL