Smart Technologies 600i3 Projector User Manual


 
4 | CHAPTER 1 – ABOUT YOUR SMART BOARD 600I3 OR SBD600I3 INTERACTIVE
WHITEBOARD SYSTEM
Protected cable routing through the projector housing and a cable cover
to prevent tampering and clutter
A secure mounting and installation system that includes:
A projector padlock loop
Mounting hardware for solid masonry or framed wall installations
Templates and instructions for positioning the system in a safe manner
ECP and Cable
Your interactive whiteboard system’s ECP features connectors for three inputs and
control for four inputs, including the direct HD-DB15 RGB connection to the projector.
Direct inputs supported include:
A single HD-DB15 (RGB) input connector and
associated audio (3.5 mm jack) for RGB or
component video and HDTV sources
(YPbPr/YCbCr with proper adaptors, not included)
An S-video (4-pin mini-DIN) and associated audio
(two RCA jacks)
A composite video (RCA jack) and associated audio (two RCA jacks)
NOTE
A specialized harness cable provided by SMART enables output to the projector.