Filter
Top Products
61 | CHAPTER 8 – REPLACING YOUR UF55/UF55W PROJECTOR LAMP
Replacing the Projector Lamp Module
After you remove the lamp from the boom, follow these instructions to replace
the lamp.
To remove and
replace the lamp
1. Wait at least 30 minutes for the projector to completely cool down.
2. Pull up the outer lamp cover with your finger.
3. Remove the outer lamp cover and keep it in a safe place.
4. Loosen the two screws on the inner lamp module with a Phillips No. 2 screwdriver.
The screws remain captive with the lamp module.