Filter
Top Products
27 | CHAPTER 3 – CONNECTING YOUR SMART BOARD 600I3 OR SBD600I3
INTERACTIVE WHITEBOARD SYSTEM
Connecting Your Guest Computer to the ECP’s Inputs
IMPORTANT
• Use the VGA connector on the ECP to connect your guest computer’s video
output. If you do not have a guest computer, use the VGA connector on the
ECP to connect your host computer’s video output.
• Most laptops require configuration to output VGA signals.
To connect your guest
computer’s video or audio
output to your ECP
1. Turn off your SMART Board interactive whiteboard system.
IMPORTANT
Make sure that you have a
shielded VGA cable (not included)
and an audio cable with 3.5 mm
plugs (optional, not included) that
are long enough to connect your
guest computer to your ECP.
2. Connect the VGA cable to the VGA
input on the bottom of your ECP.
3. Connect the other end of your VGA
cable to your computer’s video output.
4. If you’re connecting audio, connect your audio cable to the audio input.
5. Connect the other end of the audio cable to your computer’s audio output.
IMPORTANT
Your interactive whiteboard system does not include speakers. To play audio,
connect an audio system to the projector’s audio output. Consult your
authorized SMART reseller to determine your audio output options.