Smart Technologies V280 Whiteboard Accessories User Manual


 
Important
Information
Before you install and use your SMART Board™ V280 interactive whiteboard,
read and understand the safety warnings and precautions in this user’s guide and
the included warnings document. These safety warnings and precautions describe
the safe and correct operation of your SMART Board interactive whiteboard and
its accessories, helping you to prevent injuries and equipment damage.
NOTE
In this document, the term “interactive whiteboard” refers to your interactive
whiteboard and its accessories and options.
Safety Warnings and Cautions
WARNINGS
Failure to follow the installation instructions included with your interactive
whiteboard, or found in this guide, could result in personal injury or
product damage.
Read the safety warnings, precautions and other important information
published by your projector’s manufacturer. Do not stare (or allow children
to stare) directly into your projector’s beam of light. Do not touch (or allow
children to touch) your projector because it can become extremely hot during
normal operation.
Two people are required to safely mount your interactive whiteboard on a wall
or floor stand because it might be too large for one person to safely maneuver
alone. When you lift your interactive whiteboard, you and your assistant
should stand on either side of the screen, supporting its weight at the bottom
corners while balancing the top with your other hands.
Do not leave cables on the floor where they can be a tripping hazard. If you
must run a cable over the floor, lay it in a flat, straight line and secure it to the
floor with tape or a cable management strip of a contrasting color. Handle
cables carefully and avoid excessive bending.