Filter
Top Products
22 | CONNECTING YOUR INTERACTIVE WHITEBOARD TO A COMPUTER
Overview
Your SMART Board V280 interactive whiteboard’s high-speed USB 2.0 interface
enables you to connect your interactive whiteboard to your computer. Because the
included USB 2.0 cable provides both a digital signal and power from your computer
to your interactive whiteboard, you don’t require an additional power supply.
CAUTION
• For operating safety and to avoid damage to your SMART Board interactive
whiteboard, use only the included high-speed USB 2.0 cable that came with
your interactive whiteboard to connect it to a computer that has a high-speed
USB 2.0 compliant port and that bears the USB logo. In addition, the USB
source computer must be compliant with CSA/UL/EN 60950 and bear the
CE mark and CSA and/or UL Mark(s) for CAS/UL 60950.
• Use only the included high-speed USB 2.0 cable to connect your
SMART Board V280 interactive whiteboard to your computer.
IMPORTANT
Laptop computers operating in battery mode might not provide sufficient power to
run your interactive whiteboard reliably. If you’re using your interactive whiteboard
with a laptop computer, connect your laptop computer to an AC receptacle.
Connecting the USB Cable
Your SMART Board V280 interactive whiteboard
has a high-power USB 2.0 high-speed peripheral
interface that runs at speeds of up to 480 Mbps.
The unit works with USB 2.0 compliant
interfaces only.
Your interactive whiteboard’s main USB connection
is a captive flying lead cable. The connector is a
USB Type-B receptacle. This captive cable
provides convenient access to the USB receptacle
without you having to remove your interactive
whiteboard from the wall.
Captive USB Cable