Filter
Top Products
105
C:\WINNT\Profiles\Administrator\Desktop\WORK_08_21\370467401
DVS9000WW\01GB03C01-WW.fm
masterpage:Right
External Devices
Chapter 1 DVS-9000 Functions
DVS-9000/9000SF
3-704-674-01 (1)
P-BUS trigger mode actions
The actions that can be used in P-BUS trigger mode are as follows.
•Store
• Recall
•Trigger
For details of the buttons assigned to each action, see Chapter 12, “External
Devices” (Volume 2).
P-BUS timeline mode actions
The actions that can be used in P-BUS timeline mode are as follows. Use the
Device menu to set the actions.
•Store
• Recall
•Trigger
P-BUS timeline editing
At a keyframe point on the P-BUS timeline, you can set an action (setting what
action command is output to which device). At any single keyframe point you
can set actions for a maximum of 24 devices.
For the action setting (or P-BUS timeline editing), use the Device menu.
You can save the data set in the Device menu in keyframe registers. Recalling
the register starts execution of the keyframe effect, and when this reaches the
keyframe point at which actions are set, action commands are output to
external devices through the 9-pin serial port assigned to P-BUS.
For details, see “External Devices” in Chapter 12 (Volume 2).