Filter
Top Products
Chapter 5 Wipes
C:\WINNT\Profiles\Administrator\Desktop\WORK_08_21\370467401
DVS9000WW\01GB07C05-WW.fm
masterpage:Left
240
Basic Procedure for Wipe Settings
DVS-9000/9000SF
3-704-674-01 (1)
• When a diamond dust wipe is selected (pattern number 274)
For details of a pattern mix, see the next section.
For details of applying pattern modifiers, see “Setting Wipe Modifiers”
(page 242).
Pattern Mix
Combining two patterns
You can combine two selected patterns (referred to as main and “sub”) to form
a new pattern. Select a main pattern in the Main Pattern menu, then use the
following procedure.
1
In the M/E-1>Wipe menu, select HF3 ‘Sub Pattern.’
The Sub Pattern menu appears.
2
In the same way as for the main pattern, select the sub pattern.
The patterns that can be selected for the sub pattern depend on the pattern
selected for the main pattern (see the following table).
Possible combinations of main pattern and sub pattern
Yes: Combination possible No: Combination not possible
Knob Parameter Adjustment Setting values
1 H Size Particle width 0.00 to 100.00
2 V Size Particle height 0.00 to 100.00
3 Flash Rate Rate of generation of particles 0.00 to 100.00
Main
pattern
Sub pattern
Standard Enhanced Rotary Mosaic Random/
diamond
dust
Standard Yes Yes No Yes Yes
Enhanced Yes Yes No Yes Yes
Rotary No No No No No
Mosaic Yes Yes No No Yes
Random/
diamond
dust
Ye s Ye s N o Ye s N o