Filter
Top Products
Chapter 5 Wipes
C:\WINNT\Profiles\Administrator\Desktop\WORK_08_21\370467401
DVS9000WW\01GB07C05-WW.fm
masterpage:Left
248
Basic Procedure for Wipe Settings
DVS-9000/9000SF
3-704-674-01 (1)
1
In the device control block, press the [M/E1] or [P/P] button, turning it on.
The buttons in the device control block are assigned to the wipe position
setting as follows.
Table 1: Buttons and assigned settings
Table 2: Buttons assigned to functions
2
Press one of the buttons in Table 1 above, to select the wipe position to
which the operation applies. Multiple selection is possible.
3
Press the [POS] button, turning Position on.
4
Move the trackball, to set the wipe position. By pressing the [X] button,
turning it on, you can restrict movement to the horizontal direction, and by
pressing the [Y] button, turning it on, you can restrict movement to the
vertical direction. Also, when either of these buttons is lit, you can enter a
coordinate of the wipe position from the numeric keypad.
Rotating the wipe pattern (Rotation)
You can apply rotation independently to the main pattern and sub pattern. Use
the following procedure.
1
In the M/E-1> Wipe menu, select HF5 ‘Main Modify.’
The Main Modify menu appears.
2
In the <Rotation> group, select the rotation type.
Angle: Incline the pattern through a fixed angle.
Button name Setting
K1 CB1 Wipe position for key 1
K2 CB2 Wipe position for key 2
K3 FM1 Wipe position for key 3
K4 FM2 Wipe position for key 4
MAIN Wipe position for common transition (main pattern)
SUB Wipe position for common transition (sub pattern)
Button name Function
POS Toggle Position on or off.
X, Y Fix the operating direction, and enable setting of the wipe
position from the numeric keypad.
CTR Return the pattern position to the center of the screen.