Filter
Top Products
261
C:\WINNT\Profiles\Administrator\Desktop\WORK_08_21\370467401
DVS9000WW\01GB08C06-WW.fm
masterpage:Right
Basic Procedure for DME Wipe Settings
Chapter 6 DME Wipes
DVS-9000/9000SF
3-704-674-01 (1)
2
Select the desired DME wipe pattern group with one of the following
buttons.
In two-channel mode, only Slide Squeeze and User Program are selectable.
Slide Squeeze: slide and squeeze
Split Door: split and door
Flip Tumble: flip tumble
Page Turn Roll: page turn and page roll
User Program: user programmable DME
For details of DME wipe patterns, see “Types of DME Wipe Pattern”
(page 57) and the appendix “DME Wipe Pattern List” (Volume 2).
The patterns from the selected pattern group appear on the screen.
3
Press the button to select the desired pattern.
Setting DME Wipe Modifiers
You can apply various modifiers to the DME wipe pattern: setting the DME
wipe direction, pattern position, and so on.
For an overview of the DME wipe modifiers, see “DME Wipe Pattern
Variation and Modifiers” (page 58).
Specifying the DME wipe direction (Direction)
You can specify the DME wipe direction (normal/reverse).
To specify the DME wipe direction in a menu
Use the DME Wipe menu.
For the procedure, see “To specify the wipe direction in a menu” (page 243).
To specify the DME wipe direction with a button in the transition
control block
For the procedure, see “To specify the wipe direction with a button in the
transition control block” (page 243).
Modifying the DME wipe pattern edge
Use the following procedure.
1
In the M/E-1> DME Wipe menu, select HF4 ‘Edge/Direction.’
The Edge/Direction menu appears.