Filter
Top Products
Chapter 3 Transitions
C:\WINNT\Profiles\Administrator\Desktop\WORK_08_21\370467401
DVS9000WW\01GB05C03-WW.fm
masterpage:Left
188
Executing a Transition
DVS-9000/9000SF
3-704-674-01 (1)
Setting the Transition Rate
There are two ways of setting the transition rate: using the numeric keypad
control block to enter a numeric value, or using the Misc menu to access the
Transition menu for the M/E or PGM/PST bank.
Setting the transition rate in the numeric keypad control block
Numeric keypad control block
Use the following procedure.
1
In the numeric keypad control block, press the [TRANS RATE] button.
2
Press the region selection button for the M/E or PGM/PST bank for which
you want to set the transition rate, turning it on.
The numeric keypad control block display now shows the selected region
name and the current transition rate setting for the region.
3
With the numeric keypad, enter the transition rate (a value of up to three
digits).
• Example: Entering 123 constitutes an entry of 1 second 23 frames.
EFF
SNAP
SHOT
SHOT
BOX
MCRO
UNDO
STORE
STATS
MASTR ALL
P-BUS
GP1
STORE
RCALL
7
8
9
4
5
6
1
2
3
0
+/-
EFF
TRIM
CLR
AUTO
DISS
TRANS
ENBL
GPI
ENTER
DME
1
DME
2
DME
3
DME
4
M/E
1
USER
1
USER
2
P/P
P/P
M/E
1
AUX
1
AUX
2
AUX
3
AUX
4
AUX
5
AUX
6
AUX
7
FMS
1
FMS
2
EDIT
PVW
KEY SHIFT
TRANS
RATE
TRANS RATE button
Region selection buttons
Display
Numeric keypad
ENTER button