Filter
Top Products
Chapter 5 Wipes
C:\WINNT\Profiles\Administrator\Desktop\WORK_08_21\370467401
DVS9000WW\01GB07C05-WW.fm
masterpage:Left
242
Basic Procedure for Wipe Settings
DVS-9000/9000SF
3-704-674-01 (1)
You can also apply the dust mix function to the pattern generated by a
pattern mix.
Note
When a rotary wipe (pattern numbers 100-107, 150, 151, 156, 158, 160,
162, 516, 518, 604, 606, 624, and 661) or random/diamond dust wipe
(pattern numbers 270-274) is selected, the dust mix function is not
available.
Setting Wipe Modifiers
You can apply various modifiers to the wipe pattern: setting the wipe direction,
pattern position, and so on.
For an overview of the wipe modifiers, see “Wipe Pattern Variation and
Modifiers” (page 49).
Note that the available modifiers may depend on the pattern you are using. For
details, see “Possible combinations of wipe patterns and modifiers” (page
252).
Main pattern and sub pattern modifiers
You can make independent settings of the modifiers for the main pattern and
sub pattern.
• To set the modifiers for the main pattern, in the M/E-1> Wipe menu, select
HF5 ‘Main Modify,’ and make the settings in the Main Modify menu.
• To set the modifiers for the sub pattern, select HF6 ‘Sub Modify,’ and make
the settings in the Sub Modify menu.
Operations in the Main Modify menu and Sub Modify menu are the same.
Independently set modifiers for the main pattern and sub pattern
• Positioner
•Rotation
• Aspect ratio
• Pattern replication (MULTI)
•Pairing
• Modulation
•Spring
•Spiral
3 V Size Particle height 0.00 to 100.00
4 Flash Rate Rate of generation of particles 0.00 to 100.00
Knob Parameter Adjustment Setting values