Filter
Top Products
Chapter 1 DVS-9000 Functions
C:\WINNT\Profiles\Administrator\Desktop\WORK_08_21\370467401
DVS9000WW\01GB03C01-WW.fm
masterpage:Left
18
Signal Selection
DVS-9000/9000SF
3-704-674-01 (1)
Basics of Signal Selection
The M/E bank, PGM/PST bank, and the auxiliary bus control block has cross-
point buttons.
These buttons are identified by numbers common to all of the banks, and a
signal is assigned to each number.
The basis of signal selection is to select, in a cross-point button row, the cross-
point button to which is assigned the desired signal.
Bus Selection
The key row is shared by multiple buses.
To assign a bus to the cross-point buttons in the auxiliary bus control block,
press one of the AUX delegation buttons to select the bus.
The following table illustrates the correspondence between buses and cross-
point button rows, and the delegation operations.
Bank Bus name Cross-point
button row
Delegation operation
PGM/PST Program bus Program row −
Preset bus Preset row −
DSK 1 bus Key row Turn on the [DSK1] button
DSK 2 bus Turn on the [DSK2] button
DSK 3 bus Turn on the [DSK3] button
DSK 4 bus Turn on the [DSK4] button
Utility 1 bus Turn on the [UTIL1] button
Utility 2 bus Turn on the [UTIL2] button
DME external video 1
bus
Turn on the [DME1] button
a)
DME external video 2
bus
Turn on the [DME2] button
a)
DME external video 3
bus
Turn on the [DME3] button
a)
DME external video 4
bus
Turn on the [DME4] button
a)
DME utility 1 bus Turn on the appropriate
buttons in accordance with
the signal assignment made
in the Setup menu.
DME utility 2 bus