Filter
Top Products
107
C:\WINNT\Profiles\Administrator\Desktop\WORK_08_21\370467401
DVS9000WW\01GB03C01-WW.fm
masterpage:Right
Regions and Registers
Chapter 1 DVS-9000 Functions
DVS-9000/9000SF
3-704-674-01 (1)
Keyframe effect registers
Dedicated effect registers
There are 99 dedicated registers for keyframe effects in each region, numbered
1 to 99.
Shared user-programmable DME registers
In addition to the 99 DME registers for each region (i.e. each channel), there
are also shared registers for each processor as shown in the following table.
These are used for user-programmable DME.
Note
When operating with these shared registers, be sure to select the appropriate
regions depending on the number of channels. When recalling registers in the
200 range or 300 range, select two consecutive channels for the regions, as for
example [DME1] and [DME2].
Work register
This is a temporary register used when editing keyframes.
When you recall an effect, it is read from the effect register into the work
register, and when you save, the contents of the work register are written to the
effect register.
Snapshot registers
These are registers for snapshots, and there are 99, numbered 1 to 99 for each
region.
Register number Register allocation
101 to 199 Shared register for one-channel effects
201 to 299 Shared register for two-channel effects
301 to 399 Shared register for three-channel effects