Filter
Top Products
217
C:\WINNT\Profiles\Administrator\Desktop\WORK_08_21\370467401
DVS9000WW\01GB06C04-WW.fm
masterpage:Right
Key Setting Operations Using Menus
Chapter 4 Keys
DVS-9000/9000SF
3-704-674-01 (1)
Note
If in the pattern selection described below you select “Mask Pattern,” and
“Box” for the main mask, the “Size” parameter here cannot be adjusted.
Set “Size” in the Main Mask menu.
3
To adjust the pattern and color, press [Zabton Adjust].
The Zabton Adjust menu appears.
4
In the <Zabton Pattern> group, select the pattern.
Key Wipe: Use a key wipe.
Edge Pattern: Use a color mixing pattern for key edge.
Mask Pattern: Use the main mask Box or Pattern.
5
To adjust the color, press [Zabton Color] and adjust the following
parameters.
Masks
There are two masks, which can be used to mask off unneeded parts of a key
or background, or to remove defects, and these are known as the main mask and
subsidiary mask. You can either use the main mask and subsidiary mask
independently, or at the same time.
For an overview of the masks, see page 43.
Using the main mask
For example, to use the main mask for key 1 on the M/E-1 bank, use the
following procedure.
1
In the M/E-1>Key1 menu, select HF3 ‘Main Mask.’
3 Density Density 0.00 to 100.00
Knob Parameter Adjustment Setting values
1 Luminance Luminance 0.00 to 100.00
2 Saturation Saturation 0.00 to 100.00
3 Hue Hue 0.00 to 359.99
4 Density Density 0.00 to 100.00
Knob Parameter Adjustment Setting values