Filter
Top Products
Chapter 1 DVS-9000 Functions
C:\WINNT\Profiles\Administrator\Desktop\WORK_08_21\370467401
DVS9000WW\01GB03C01-WW.fm
masterpage:Left
130
Setup
DVS-9000/9000SF
3-704-674-01 (1)
Output signal settings (Output)
• Output Assign: Assign the signals output from the Output ports.
• Video Clip: Adjust the clip levels (White Clip, Dark Clip, and Chroma Clip)
for the output signals from each of the Output ports.
• V Blank: Adjust the vertical blanking width for the output signals from each
of the Output ports. The setting is the number of scan lines from the reference
blanking position of field 1 for the particular format which should be
masked.
• Through Mode: Enable or disable through mode.
• Safe Title: Enable or disable safe title, and carry out settings for box 1 and 2
and cross.
• Ref. Output Phase: Set the reference output mode and phase adjustment.
Settings relating to video switching (Transition)
• Transition Preview: Specify the operating mode for transition preview for
each of the M/E and P/P banks.
• Key Transition: Specify the operating mode for independent key
transitions.
• Bus Toggle: Switch the bus toggle for each of the M/E and P/P banks on or
off.
• Split Fader: When the bus toggle is off, the split fader settings are enabled.
For each of the M/E and P/P banks, select enable or disable.
• Fade Curve: Set the relationship when carrying out a transition, between the
fader lever position and the advancement state of the transition.
Key, wipe and frame memory settings (Key/Wipe/FM)
• Key Memory: Set the key memory operating mode for each of the M/E and
P/P banks.
• Video Proc Memory: Enable or disable video process memory.
• Show Key: Enable or disable show key for edit preview, M/E and P/P Pvw/
K-Pvw.
• DSK Auto Drop: Specify a DSK to be turned off automatically when a
cross-point button on the P/P program bus is pressed.
• Key Priority: Set the key priority operating mode for each of the M/E and
P/P banks. In DSK mode, the key priority is fixed.
• Xpt Hold mode: Set the operating mode for the cross-point hold button
provided on the key bus for each of the M/E and P/P banks.
• Pattern Limit Transition: Set the operating mode when the pattern limit is
released for each of the M/E and P/P banks.
• Wipe Edge Default: Adjust the wipe edge softness for each of the M/E and
P/P banks.
• FM Auto Store: Switch on or off the function to automatically attach a name
and save in frame memory.