Filter
Top Products
Chapter 7 Frame Memory
C:\WINNT\Profiles\Administrator\Desktop\WORK_08_21\370467401
DVS9000WW\01GB09C07-WW.fm
masterpage:Left
274
Frame Memory Operations
DVS-9000/9000SF
3-704-674-01 (1)
1
Press [Store].
The keyboard window appears.
2
In the keyboard window, enter the file name (maximum 8 characters).
3
In the keyboard window press the [Enter] button.
This saves the freeze image as a file in memory.
Selecting the way in which images are combined
To select the way in which the memory image and input signal are combined
(see page 63), use the following procedure.
1
In the Edit>Composite menu, press [Composite Adjust].
The Composite Adjust menu appears.
Note that to preview the composite image on the monitor screen, in this
menu <Output> group, select [Memory Input].
2
In the <Type> group, select one of the following methods of combination.
• Pattern Key: pattern key
• Ext Key: external key
(Can only be selected when “V/K MODE” is on.)
•Mix: mix
Note
In the Input Mask menu, if “Sub Mask” is on, when you select a pattern
key, external key, or mix, “Sub Mask” goes off. Again, if any of these is
selected when you turn “Input Mask” on, any combination method
selected in the <Type> group is deselected.
•NAM: non-additive mix
If none of the above is selected, image combination is not carried out.
3
Depending on the selection in step 2, make the required settings.
• When pattern key is selected
Press [Pattern Select] to display the Composite Adjust>Pattern Select
menu, and carry out pattern selection.
Press any pattern from those displayed (standard wipe patterns 1 to 24) to
select it, then adjust the following parameters.
Knob Parameter Adjustment Setting values
1 Size Size of pattern 0.00 to 100.00