Filter
Top Products
Chapter 3 Transitions
C:\WINNT\Profiles\Administrator\Desktop\WORK_08_21\370467401
DVS9000WW\01GB05C03-WW.fm
masterpage:Left
178
Basic Operating Procedure
DVS-9000/9000SF
3-704-674-01 (1)
Using the transition preview function (page 196), you can check the
transition on the preview monitor.
Note
To carry out DME wipes requires the optional BKDS-9470 DME board
set.
7
Carry out the transition in the transition execution section.
For a gradual transition such as a mix (dissolve) or wipe: Press the
[AUTO TRANS] button, or operate the fader lever.
To execute a transition by pressing the [AUTO TRANS] button, first
set the transition rate (specified as the duration of the transition).
(See “Setting the Transition Rate” (page 188).)
When you have selected a wipe or DME wipe as the transition type,
you can also set the transition range. (See “Pattern Limit” (page 189).)
For an instantaneous transition: Press the [CUT] button.
For details, see “Executing a Transition” (page 187).