Filter
Top Products
23
C:\WINNT\Profiles\Administrator\Desktop\WORK_08_21\370467401
DVS9000WW\01GB03C01-WW.fm
masterpage:Right
Transitions
Chapter 1 DVS-9000 Functions
DVS-9000/9000SF
3-704-674-01 (1)
Transitions
In the M/E and PGM/PST banks, the switch from the current video stream
(appearing on the corresponding program monitor) to a new video stream is
referred to as a transition.
Selecting the Next Transition
To execute a transition, it is first necessary to decide how the image will be
changed as a result of the transition. This selection is carried out using the next
transition selection buttons (see page 140) in the transition control block of the
M/E or PGM/PST bank.
For details of operations, “Basic Operating Procedure” (page 176).
In the M/E bank and PGM/PST bank, you can change one of the images, the
background, and keys 1 to 4 (downstream keys 1 to 4 in the PGM/PST bank),
and also vary combinations of these simultaneously.
The following are examples of transition.
Changing the background
A background transition switches from the video currently selected on the
background A bus (the current video) to the video selected on the background
B bus (the new video).
In the default selection of flip-flop mode (see page 33), the background always
switches in the direction from the A bus to the B bus. When the transition
completes, the cross-point selections on the A and B buses are interchanged.
Background BBackground A
Transition