Filter
Top Products
Chapter 3 Transitions
C:\WINNT\Profiles\Administrator\Desktop\WORK_08_21\370467401
DVS9000WW\01GB05C03-WW.fm
masterpage:Left
198
Independent Key Transitions
DVS-9000/9000SF
3-704-674-01 (1)
Setting the Independent Key Transition Type
You can also select the required independent key transition type by a menu
operation.
Use the following procedure.
1
In the M/E or PGM/PST menu, select first the desired one from VF1
‘Key1’ to VF4 ‘Key4,’ then HF6 ‘Transition.’
The Transition menu for the selected appears.
2
Select the required transition type in the <Transition Type> group.
If, in the Setup menus, you set insertion/deletion as independent modes,
make the settings for insertion in the <On Transition Type> group, and the
settings for deletion in the <Off Transition Type> group.
Setting the Independent Key Transition Rate
You can set the transition rate using the Key menu to access the Transition
menu for the M/E or PGM/PST bank.
1
In the M/E or PGM/PST menu, select first the desired one from VF1
‘Key1’ to VF4 ‘Key4,’ then HF6 ‘Transition.’
The Transition menu for the selected key appears.
2
Select any transition type in the <Transition Type> group.
If, in the Setup menus, you set insertion/deletion as independent modes,
make the settings for insertion in the <On Transition Type> group, and the
settings for deletion in the <Off Transition Type> group.
3
Turn knob 1 to set the transition rate.
Knob Parameter Adjustment Setting values
1 Transition Rate Transition rate 0 to 999 (frame count)