Filter
Top Products
Preparations
16
3
Close the cover and press down while sliding it to
make sure it locks into place.
If the battery compartment cover is facing the ground
when it is opened, the batteries will fall out. You can
prevent this by making sure that the bottom of the
camera is facing up when replacing the batteries.
To connect to an AC power source
Connect the supplied UPA-AC05 AC power adaptor to
the DC IN jack on the camera, and connect the AC
adaptor to a power outlet with the power cord.
Note
Make sure that the AC power adaptor is near the power
outlet during use. If the camera malfunctions,
immediately disconnect the AC power adaptor from the
power outlet to cut off power supply.
To attach the tripod
You can attach the camera to a tripod using the tripod
screw hole located on the underside of the camera grip.
Note
Tighten the screw for the tripod securely. If the screw is
loose, the camera may fall off. However, using too much
force when tightening may damage the screw hole.
Make sure that the screw is inserted straight before
tightening it.
Note on replacing batteries
Camera
UPA-AC05 AC power
adaptor (supplied)
AC power cord
to power outlet
Camera
Tripod