Filter
Top Products
Settings
30
Displaying the SETUP Screen
The SETUP screen can be displayed regardless of
whether the mode dial is set to – or .
1
Press the MENU/GO BACK button.
The MENU screen appears.
2
Select SETUP by pressing the v or V control
button.
3
Press the ENTER button.
The SETUP screen appears.
To exit the menu and return to the
previous screen
Press the MENU/GO BACK button.
Storing Custom Settings for Each
MENU in Capture Mode
On this camera, each of the mode dial positions –
stores a custom setting for the Capture mode
MENU.
The custom settings are stored under any of the five
– marks on the mode dial. Because the custom
settings remain in memory even if the camera is turned
off, they can always be recalled later when shooting.
1
Before customizing the settings in the MENU,
select one of the five locations – on the
mode dial to store the custom setting.
2
Customize the settings.
3
Exit the MENU screen and return to the Capture
mode display. Then, press the ENTER button.
Your customized settings are stored in the location
you selected. Setting values are saved when you
press the ENTER button.
To recall stored custom settings
Set the mode dial to the – mark for the location
where the custom settings are stored.
Note
If you cut off the power supply without pressing the 1
button, such as by removing the batteries during use or
by disconnecting the AC power adaptor, your custom
settings may not be stored properly.
2
3
1
1