Filter
Top Products
Menus
55
Displaying the Firmware Version
( VERSION)
You can display the camera’s firmware version. Use this
information when consulting a service representative
about the camera.
1
Display the SETUP screen.
For details on displaying the SETUP screen, see
“Displaying the SETUP Screen” on page 30.
2
Select VERSION by pressing the v or V control
button.
3
Press the ENTER button.
The VERSION screen appears.
4
Press the ENTER button.
The Capture or Playback mode screen reappears.
Locking the Camera Menus
You can keep menu screens from displaying even when
the MENU/GO BACK button is pressed during Capture
or Playback mode. This can prevent accidental changes
to menu settings.
To lock the menus
Press the MENU/GO BACK button for at least five
seconds. The menu screen disappears, and the lock icon
appears. This icon indicates that the menus are now
locked and pressing the MENU/GO BACK button will
not display the menu screen.
The menus remain locked even when you switch
between Capture and Playback modes or turn the power
off.
To release the menu lock
Press the MENU/GO BACK button for at least five
seconds. The lock icon disappears, and the menu
screen appears.
2
3,4