Filter
Top Products
Menus
38
Setting the Shooting Conditions
The shooting conditions of the camera are factory set to Manual Exposure, Flash: Auto, but you can change the shooting
conditions using the menus as necessary.
The shooting conditions available for configuration differ depending on the exposure control and flash settings, as
shown in the table below.
: Default setting
* When shooting in a dimly lit environment, switching the exposure compensation will not change the exposure level.
EXPOSURE
&
FLASH Mode
Flash
Control
Prelighting/
Prephotometry
Aperture Shutter Speed ISO Sensitivity
White Balance
Exposure
Compensation
Auto Flash* Auto
with Preflash
Prephotometry
Prelighting
Auto Auto Auto Auto +/–2.0EV
by 1/3EV Step
(Shutter Control)
+2.0EV
+1.7EV
+1.3EV
+1.0EV
+0.7EV
+0.3EV
±0.0EV
–0.3EV
–0.7EV
–1.0EV
–1.3EV
–1.7EV
–2.0EV
Flash ON* Prephotometry
Prelighting
Flash OFF No Lighting Prephotometry
No lighting
RED EYE* Auto
with Preflash
Prephotometry
Red Eye
Reduction
Lighting
Controlled
Flash
without pre-
flash
Auto with
Zoom and EV
No Prephotometry
No Prelighting
Lighting Only
when Shooting
Fixed
(Open)
Fixed
(1/250)
Auto with
Zoom and EV
Auto +/–2.0EVby
1/3EV Step
Forced Flash
without pre-
flash
–
7 steps
(100/70/50/35/
25/18/12%)
without
Preflash
No Prephotometry
No Prelighting
Lighting at Set
Level Only when
Shooting
(Open or
Closed)
(1/250 or 1/125) (ISO 80, 100, 200,
400)
(3000 to 7000K or
OnePush)
EV
compensation
disabled
Exhibit Flash No Lighting No Prephotometry
No Lighting
(Open or
Closed)
(1/2 to 1/1000 [s]) (ISO 80, 100, 140,
200, 280, 400)
(Auto, 3000 to
7000K, OnePush)
EV
compensation
disabled
Open
1/250 ISO 100 5500K
Open
1/250 ISO 100 Auto