Filter
Top Products
Operations (Shooting and Printing)
20
To attach the tray cover
Keep the supplied tray cover on the paper tray when not
in use to protect the print paper inside from dust and
other particles. You can attach a tray cover to any of the
UPC-X46, UPC-X45, and UPC-X34 series’ paper trays.
To connect the printer to a power outlet
Connect the printer to a power outlet using the power
cord.
Operations
(Shooting and Printing)
Image resolution settings
Before starting to shoot, we recommend that you select
an optimal image resolution for your print size. When
shooting ID pictures, set the image resolution to HIGH-
ID or STD-ID.
For details on how to select an image resolution, see
“Setting the Image Resolution (IMAGE
RESOLUTION)” on page 42.
Shooting condition settings
The shooting condition settings on the camera are
factory set to allow shooting without manual
configuration, but you can change the shooting
conditions as necessary using menus such as the one in
Capture mode.
We recommend configuring the settings to match your
usage environment.
For details on setting the shooting conditions, see
“Setting the Shooting Conditions” on page 38.
Note
Images may be damaged and the camera may not
operate properly if power is cut off while shooting or
deleting pictures. Make sure that the AC adaptor does
not disconnect and the battery compartment cover does
not open during operation.
Tray cover
Printer
Power cord
to power outlet